Pipe & Epoxy Repair Kits

Coating Kits

Pipe & Epoxy Repair Kits
[click to enlarge]
Pipe & Epoxy Repair Kits

Pumpcoat / PCI Contractor Specialists can coat just about anything that needs it. Pumpcoat is a distributor for Arcor Epoxy, Duraflex, Sherwin Williams & Glidden Professional/Devoe Coating Systems. We have had excellent success using these high quality materials to increase corrosion resistance and wear resistance. It also is helpful in rebuilding worn parts. Arcor is of comparative quality to Belzona, but much less costly. We have a team of experienced coaters that will come do the coating for you, or if you just need the product to do in-house. We can supply the material and a service site supervisor to work with your personnel or local contractor.

Some of the equipment Pumpcoat can do cost-saving Coating Repairs on for you:

  • Cooling Towers
  • Heat Exchangers
  • Containment Tanks
  • Oil Coolers
  • Pump parts
  • Pump Interiors
  • Tube Sheets
  • Secondary Containments
  • Floors
  • Classifier Cones
  • Pulverizer lines
  • Ash piping
  • Coal feeder Piping

Pipe Wrap Kits & Repairs

Pumpcoat is a representative for Neptune Research's Pipe Wrap systems. These unique systems are cost-effective, long lasting and durable alternatives to repairing leaks or weak areas, corrosion damage, pitting or other problems found in pipes. There are products that can be used on pipes both under pressure and not, in and out of service, and in many cases the repair area will be stronger than the original pipe.

Pipe wrap cures quickly. Kits can be purchased for your maintenance people to do repairs in-house, or Pumpcoat personnel are trained and available to come on-site for a turn-key repair. These kits are excellent to have in your stock room for emergencies.

Please check out the following Videos on how versatile the Pipe Wrap products are (note clicking on the video links will take you away from Pumpcoat to the manufacturer's website)

click for video

Syntho-Sleeve® Outer Wrap is designed to protect welded field joints on pipelines from the abrasion stresses and scarring of directional drilling and boring. Syntho-Sleeve provides mechanical protection to the preapproved corrosion coating of your choice, such as viscous elastic coatings, epoxy coatings, shrink sleeves, and cold applied tapes.


  • Horizontal Directional Drilling
  • Boring
  • Coating & Coating Protection

click for video

Syntho-Glass® is a patented fiberglass pre-impregnated composite that is activated by salt or freshwater. It is ready to use and does not require any measuring or mixing. This system, when used with the appropriate primary sealant, enables you to repair and reinforce virtually any diameter pipe in minutes. Syntho-Glass not only restores a pipe to its original psi rating, but actually can make the repair area stronger than the original pipe, reducing downtime, saving in parts and labor. With an initial setting time of only 30 minutes (75°F/24°C), Syntho-Glass is excellent on copper, steel, SS, PVC, FRP, clay, concrete, rubber, and more. It is safe to use, nontoxic, noncombustible, and odorless. Syntho-Glass is a versatile solution for industries where quick-action repair can be critical.


  • Impact protection
  • Emergency repair
  • Corroded pipes
  • Irregular pipe fittings
  • Force mains and gravity lines
  • Joint and tee repair
  • Underwater repair and splash zone

click for video

Syntho-Glass®UP (Under Pressure) Repair System was specifically designed for under pressure leak repair applications on copper, steel, SS, PVC, FRP, concrete, rubber, and more. This complete system offers the geometric flexibility to repair joints, tees, couplings, and pinholes. It simplifies the application process and is prepackaged to accommodate pipes up to 10" in diameter. Larger repair applications can be engineered if needed.


  • Under-pressure Leaking Joints & Pinhole Leaks

Back to top

Copyright © 2013 Pumpcoat / PCI Contractor SpecialistsSite created by Thomas Web Solutions